bond line
英 [bɒnd laɪn]
美 [bɑːnd laɪn]
粘合（剂）层；胶层
双语例句
- So we have h, then we can draw our bond as a line.
那么我们有氢，可以把我们的键画成一条线。 - Licenses have also been sparingly given to other authors to carry on the main Bond line, including one to Kingsley Amis.
同时，他们还悉心挑选一些作家，授予他们创作以007为主线的小说写作资格，其中一个作家是金斯利•亚密斯。 - Sovereign credit spreads will be subject to rather desperate policy endgames and equity and corporate bond risk spreads will follow in line, despite the overall health of the corporate sector in the current upturn.
主权信用息差将受孤注一掷的收尾政策左右，股票和企业债券的风险息差也将步其后尘，尽管当前企业处于上升趋势，总体状况良好。 - Some pores appeared mainly near in the bond line, but porosity can be suppressed to a great extent by increasing welding speed or electron beam scanning.
结果表明，在保证试件完全焊透的情况下，降低电子束的线能量，可在一定程度上提高接头的强度； - Indeed, on average, offshore renminbi bond yields have not moved in line with onshore yields.
确实如此，离岸人民币债券平均收益率的变动与在岸市场收益率的变动并不同步。 - The result shows that the bond between surfacing weld and base metal is metallurgical bond, and bond line is clear.
结果表明，喷焊层与基体是冶金结合，结合线清晰。 - Experimental results show that the bond interface departures from original central line to aluminium alloy in the LID bonds of Al based composite and aluminium alloy, and solute atoms distribute fairly asymmetrically around the joint area.
结果表明，LID连接Al基复合材料和Al合金形成的界面明显向Al合金一侧偏移，并且溶质原子在界面两侧分布存在明显的不对称现象。 - The testing results showed that the weakest fracture toughness of welded joints was at the overheated zone of HAZ nearing the bond line, and the low toughness brittle failure was caused by the existance of the widmanstatten structure and structural heredity of HAZ.
结果表明，焊接接头断裂韧性的薄弱环节在热影响区（HAZ）近熔合线的过热区，该区中粗大的魏氏组织和部分组织遗传现象是导致低韧性脆化的主要原因。 - This way could measure the properties and shows the distribution law of every narrow zone of the welded joint, especially the bond line.
该方法能够准确地测定焊接接头各狭窄区域内材料的性能值以及它们的变化规律，特别是熔合线附近材料性能的变化梯度。 - In the uranami weld metal of combined weld, the weakest zone of fracture toughness is near the bond line, and is related with the structure characteristic and carbon diffusion of the dissimilar steel weld.
组合焊缝接头断裂韧性的薄弱环节在底层焊缝中近熔合线处，异种钢焊缝熔合区的组织特性，特别是碳的迁移，与该区的低韧性密切相关。 - Improvement of the calibration method for cement bond logging and overcome of the base line shift
水泥胶结测井刻度方法的改进及基线漂移的克服 - The purpose of the work is to clarify the reason why the premature macrocracks occured near the bond line in the HAZ during bend test and thus resulted in the low values of bend angle.
本文研究了此钢种焊接接头冷弯角度过低，于熔合线产生宏观可见裂纹的原因。 - Based on the improvement on the conventional sectional lumped parameter bond graph and introduction of the kinetic friction factor, a new sectional lumped parameter model using bond graphs for dynamic response investigation of laminar line was worked out.
对传统管路分段集中参数模型进行修正，通过引进动摩擦液阻，提出了适用于研究层流管路动态特性的分段集中参数键图模型。 - This paper, connected with practical production of ERW steel pipe, discussed the effect mechanism of the bond width, HAZ width and stream line angle caused by heat input, upsetting force and welding speed during the welding of ERW steel pipe.
本文结合生产实际论述了ERW焊接时输入热量、挤压力、焊接速度对熔合线宽度热影响区宽度、流线上升角的影响机理。 - A Bond Graph Model of Inlet Flow and Outlet Flow for the Distributed Parameter Fluid Transmission Line and its Experimental Research
输入流输出流管道分布参数键图模型的建立与实验研究 - In linear behavior, bond performance occurs in two stages: first stage, stress-displacement relation is expressed as a linearly ascending straight line; second stage, shear stress suddenly drops to zero.
在线性行为中，粘结性能发生在两个阶段：第一阶段，应力-位移关系表现为一条上升的直线，第二阶段，剪切应力突变为零。 - The welded seam of the TWB jointed by LBW contained large quantity tiny equiaxial crystal and the heat-affected-zone ( HAZ) was not obvious, the columnar crystals and cellular dendrite near the bond line were grown in the orientation of radiation.
激光拼焊板焊缝中心为大量细小的等轴晶；热影响区不明显，在熔合线附近存在少量沿散热方向生长的柱状晶和胞状树枝晶。